Print This Page
|
|
|
| (Cutting Capaacity) Height | 13" |
| (Cutting Capacity) Width | 13 5/8" |
| (Blade) Width | 1/8" - 3/4" |
| (Blade) Length | 111" |
| (Table) Width | 16" x 20 1/2" |
| (Table) Left Tilit | 1° |
| (Table) Right Tilt | 46° |
| Groove "T" Slot | (2) 3/8" x 3/4" |
| Height to Floor | 39 1/2" |
| (Motor) Amps | 14/7 |
| (Motor) Horsepower | 1 1/2 HP |
| (Motor) Volts | 115/230 V |
| (Motor) Speed Capacity | 2 |
| (Motor) Speed Range | 1445/2950ft/min |
| Overall Height | 75" |
| Overall Width | 30" |
| Overall Depth | 25" |
| Net Weight | 251 Lbs. |
| Warranty | 2 Years |
Customers most agreed on the following attributes:
from Palm Springs, CA on 10/3/2007
[...]. The manual was very poorly written with difficult to interpret pictures. Perhaps they assume you are an old hand at this--bad mistake. [...]. Finely just resorted to Yankee ingenuity to get the job done. The lower guide bearing are not adjustible to full width of the1/2 inch blade and the only fix is to add another bearing. Because of the frame construction you cannot do coplanar testing and need to make a jig. I have made a secondary dust port to eliminate most of the lower housing dust. Their [$] 14 inch bandsaw even has a second port. Having said all the negative things this is one very capable machine with all the bells and whistles. I absolutely would purchase it again.
from Rochester, NY on 9/24/2007
The review in [...] didn't do this machine justice - I wonder if they even reviewed the same machine! It went together like a dream, adjusted easily, and the blade changing, which [...] said was cumbersome, took 35 seconds, start to finish. The first cut I made was to resaw some 6" wide oak - it cut like butter, smooth as a baby's bottom, and perfectly symetrical, from end to end. This is a great band saw.
from Beaver, Kansas on 9/13/2007
very pleased with the bandsaw, unit very well designed and made, considering other Rikon tools