Takagi T-M199 Mobius Water Heater (23.6in H x 18.5in W x 8.9in D) - T-M199

The T-M199 is very similar to the T-M1 and offers the same amount of thermal efficiency but yields a lower amount of BTU's. The T-M199 offers manifolding capabilities and works well for both commercial and residential applications.

The T-M199 fills a niche between the T-K3 and its big brother the T-M1.

Parallel Installation: Like the T-M1, the T-M199 can be installed in parallel with up to 20 units per controller, for a total of 108 GPM at 60ºF /\T, or 130 GPM at a 50ºF /\T. This large flow capacity through parallel connections will meet the hot water needs of all high-volume residential and commercial applications.

Direct-Vent Conversion: The T-M199 can be converted to a direct vent model for inside installation that needs to import combustion air from the outside.

Four Temperature Settings: The T-M199 offers four separate temperatures, set by dipswitch: 113ºF , 122ºF, 140ºF, and 182ºF. Setting temperatures other than these four presets requires the TM-RE10 temperature controller.

At 199,000 BTU/h, the T-M199 offers outputs similar to the T-K3, but its maximum flow rate is higher at the lower /\T range.

At a /\T of 60ºF in warmer areas - for example, where the winter ground water is 60ºF and with the output set at 122ºF - the unit will provide a 5.4 GPM, or 324 GPH.

In colder areas where the input temperature may be 40ºF or less, expect a flow rate about 4.1 GPM, or 246 GPH.

• Technology to meet today’s demands

  From bathroom to kitchens, the latest trends in home design all add up to one thing: a growing demand for hot water throughout the home. With an average soaker tub holding 70 gallons of water, today’s homes need more than an old-fashioned 50-gallon tank of hot water to keep up. They need the consistent, never-ending supply of hot water you can get with a tank-less hot water heater from Takagi.

• Up to 50% energy savings

  Not only does Takagi provide you with plentiful and endless hot water…it does it in the most energy-efficient way possible. Instead of keeping a whole tank full of hot water while you’re not using it, Takagi instantly heats only the water you need.

  A Takagi tank-less heater can pay for itself in energy savings alone. As of January 1st, 2006, homeowners are eligible for a $300 federal income tax credit by installing energy-efficient water-heating units from Takagi

• A legacy of innovation and dependability

  For more than sixty years, Takagi technology has been efficiently heating water in homes around the world. We’re so confident of the quality, dependability and long-term performance of our products that each model carries a ten-year warranty on the heat exchanger and a five-year warranty on all major parts.

2.3in
WC