|
The Sanigrind is a grinder unit only and is designed to work with a standard bottom outlet toilet. The beauty of the Sanigrind is the opportunity for the contractor or homeowner to select any model or color of toilet they wish. The Sanigrind is based on the best selling Sanibest unit and it will also dispose of waste water from a handbasin, bathtub and a laundry washer as well.*
The Sanigrind unit discharges the effluent through a 3/4-inch diameter pipe into a sanitary gravity drain. Effluent can be pumped 18 feet or hoizontally to 150 feet, or a combination of both. The unit is installed on the floor, while the toilet, bath or shower, and handbasin are situated on a raised platform.
The Sanigrind should be connected to a ground fault circuit interrupter (GFCI) circuit only. The supply is 120V, 15A single phase. A micro-switch in the pressure chamber is activated by the level of water in the unit arising from the discharge of the sanitary appliance. It will operate when the toilet is flushed. Simple valves on each of the side inlets close momentarily until the toilet waste is reduced and pumped away. A non-return valve prevents back flow into the unit.
The Sanigrind must only be used for human waste and toilet tissue. It is however designed to grind up other items that may accidentally be flushed down the toilet such as strands of wool, sanitary napkins, condoms, but not dental floss, cat litter or disposable diapers, nor is the Sanigrind to be used as a pump for the kitchen sink.
* Laundry washer must drain into a laundry tub first prior to the Sanigrind |