45° Chamfer Edge Forming Router Bit - 4345° Chamfer Edge Forming Router Bit
Features
- For 45-degree bevel cutting
- Lower depth setting results in chamfer with fillet
- Pozi-Stop Shank
- Automatically locate bit at correct height in collet - no test cuts needed
- Switching between bits during a project is fast and easy - bits will always be at exactly the same height
- Creates a stronger, longer-lasting bit
- Less vibration - smoother cuts
- Monster Carbide
- 40% thicker carbide than on standard bits
- Results in a stronger, longer-lasting bit
- Better heat and force distribution
- Generates less friction, runs cooler
- Provides smoother cuts
- Allows faster feed rate
- Can be resharpened more times than standard carbide
Using the table, choose which size router bit you would like to purchase below.
| Model #
| Bevel
| Flute Length
| Fillet
| Shank Dia.
| Overall Length |
| 43072PC
| 45°
| 49/64"
| 1/4"
| 1/4"
| 2-31/64" |
| 43190PC
| 45°
| 49/64"
| 1/4"
| 1/2"
| 2-31/64" |
45° Chamfer Edge Forming Router Bit - 43
Type : Edge Forming
Note: It is the sole responsibility of the customer to download and mail in the rebate form by the respective closing date. Hechinger.com (Home Decor Products, Inc.) cannot be held responsible for non-compliance of the afore-mentioned. Please click here for detailed policies.
|
