8 Gallon per Minute Shallow Well Jet Pump - FP4012-088 Gallon per Minute Shallow Well Jet Pump
For wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water. Built-in shallow well jet has corrosion-resistant nozzle and venturi. Fiberglass-reinforced thermoplastic provides total corrosion resistance, and high resistance to sandy water. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water systems tank. Top discharge. 1-1/4" NPT suction and 3/4" NPT discharge pipe sizes. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. U.L. Listed.
PRODUCT FEATURES
- Capacities up to 8 gallons per minute at 40 PSI (Average household use 6-10 gpm)
- Superior performance at depths to water of 25’ or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Heavy-duty A.O. Smith motor
- Ready-to-install 230 volt motor – see manual for 115 volt conversion
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
- Pressure switch pre-wired with 30-50 PSI pressure setting
- 1-1/4” NPT suction and 3/4” NPT discharge pipe sizes
- Serviceable unit
PRODUCT SPECIFICATION
- Warranty: 3 Years
- Shipping Weight: 25.2lbs.
