Traditional Horizontal Panel Raiser Cabinet Router Bit - 435Traditional Horizontal Panel Raiser Cabinet Router Bit
Features
- Wide, shallow cutting bit for easy raised panel effect
- Pozi-Stop Shank
- Automatically locate bit at correct height in collet - no test cuts needed
- Switching between bits during a project is fast and easy - bits will always be at exactly the same height
- Creates a stronger, longer-lasting bit
- Less vibration - smoother cuts
- Monster Carbide
- 40% thicker carbide than on standard bits
- Results in a stronger, longer-lasting bit
- Better heat and force distribution
- Generates less friction, runs cooler
- Provides smoother cuts
- Allows faster feed rate
- Can be resharpened more times than standard carbide
- Note: Not for use in hand-held routers.
Using the table, choose which size router bit you would like to purchase below.
| Model #
| Overall Dia.
| Width Cut
| Flute Length
| Angle
| Shank Length
| Overall Length |
| 43570PC
| 2-3/4"
| 1-1/8"
| 5/8"
| 26°
| 1/2"
| 2-11/32" |
| 43527PC
| 3-1/2"
| 1-1/2"
| 5/8"
| 18.5°
| 1/2"
| 2-5/16" |
Traditional Horizontal Panel Raiser Cabinet Router Bit - 435
Type : Cabinet Bits
Note: It is the sole responsibility of the customer to download and mail in the rebate form by the respective closing date. Hechinger.com (Home Decor Products, Inc.) cannot be held responsible for non-compliance of the afore-mentioned. Please click here for detailed policies.
|
